Systèmes de produits: Chit special de rosturi

CF 100 este un mortar de rost bicomponent, mineral-anorganic, pe baza de silicati pentru rosturi cuprinse între 2 și 10 mm. Produsul este indicat pentru chituirea rosturilor pardoselilor și peretilor, atât la interior cat și la exterior. CF 100 a fost dezvoltat special pentru aplicarea în obiective industriale si în zone expuse substantelor agresive, cum ar fi bucatarii profesionale, piscine si zone comerciale.

• Rezistenta chimica ridicata
• Rezistenta ridicata la aburi
• Rezistenta bacteriana ridicata
• Deschis la difuzia vaporilor

Grouting of:

• vitreous and porcelain stoneware


• artificial stone slabs


• floor clinker slabs


• heavy clay


• ceramic mosaics

In order to prevent discoloration the tile adhesive must be fully set and cured before grouting can commence.  

frost-free, cool and dry at least 9 months in its original sealed container

~ 4.5 l of water/ 25 kg

~ 25 minutes

after ~ 3 hours

after ~ 7 days

• first pour the water into a clean mixing container


• then add the measured powder component


• mix up carefully for 3- 5 minutes with a slow rotating agitator (max. 400 rpm) until a homogeneous mass has been achieved


• briefly stir again after the maturing time


• rout tile covering using a special grout float


• 
  
  
  
  • pre-wash the surface using a hydro sponge and continue with the final cleaning immediately
  
  
  
  

+ 5 °C to + 30 °C

format (cm) 24 x 11.5 (split tiles) joint width (mm) 8 joint depth (mm) 10 = 2.29 kg/m² format (cm) 20 x 20 joint width (mm) 5 joint depth (mm) 8 = 0.83 kg/m²

Further technical details can be found in our technical data sheets on our website: www.botament.com.