Product systems: Concrete and mortar additives

UV 2 HP Highly resistant floor sealant 2c



BOTAMENT® UV 2 HP is a sealant for mechanically and chemically loaded surfaces in interior and exterior areas. BOTAMENT® UV 2 HP is suitable for the refurbishment of damaged concrete surfaces particularly in the agricultural sector.


  • Highly abrasion-resistant
  • For surfaces subject to high mechanical and chemical stress
  • Highly resistant against organic and inorganic acids
  • Wide choice of applications
  • For walls and floors
Application areas


Impregnation and sealing of:

  • concrete

  • cement screeds

  • existing reaction resin coatings


Substrate preparation


The substrate must be in the following condition:

  • clean and frost-free

  • stable

  • free from grease, water soluble coats, cement laitance, separating agents and loose particles




cold, dry and frost-free at least 12 months in its original sealed container


Mixing ratio


component A : B = 10 : 3


Processing time


~ 45 minutes




after ~ 24 hours




  • add B component to A component and mix both together with a slowly rotating mixer for at least 3 minutes

  • to prevent mixing errors pour BOTAMENT® UV 2 HP afterwards into a clean container (scratch the container clean) and mix again

  • roll out the ready mixed material with a short-pile sheepskin roller onto the dried primer across the entire area

  • apply the top coat onto the dried base layer with a short-pile sheepskin roller

Surface sealings made of BOTAMENT® UV 2 HP should be done applying at least two layers. To achieve a slip-resistant surface the first layer of BOTAMENT® UV 2 HP must be scattered while fresh with dried quartz sand of a grain size between 0.1 – 0.3 mm.


Application and substrate temperature


+ 8 °C to + 30 °C

generally 3 °C over dew point

relative humidity ≤ 85 %


Consumption or Usage


~ 0.30 kg/ m² (per layer)


Interval between application of layers


≤ 48 hours


Vital information


BOTAMENT® UV 2 HP must be protected against moisture while curing.


Container Dispatch unit sold by the pallet Product number EAN Code
10 kg Tin bucket kieselgrau - - 53407320245609 4030905002119
Versiegelung 10 kg Tin bucket grün - 56 Geb./Pal. Units/s 53407600245609 4030905002133
Grundierung 1 kg Tin transparent - - 50700010115609 4030905110739
Grundierung 5 kg Tin bucket transparent - - 50700010195609 4030905110760
Supplier search
Safety datasheets